Saturday, July 27, 2013

LPS Output Units when the Inflow is CMS in InfoSWMM and H2OMap SWMM

LPS Output Units when the Inflow is CMS

1.   The inflow time series is in units of CMS,
2.   If you set the internal units to LPS in Run Manager,
3.   Set the output units to LPS in Output Unit Manager,
4.   Add a Scale multiplier of 1000 in the Inflows DB Table then

The inflows do not have to be altered, the internal model flows will LPS, the velocity will be m/s with 6 decimal places in the RPT file and the flows will be LPS with 3 decimal places in the RPT file. 

No comments:

RTK SWMM5 Import to ICM using ODIC

  Object Fields Import Fields Default Values RTK hydrograph ID ID Response ratio R - short term RFVOL_EFF 0.050 Time to peak T - short term ...