Saturday, November 24, 2012

SWMM 4 and SWMM 5 St. Venant Solutions Contrasted

SWMM 4 and SWMM 5 St. Venant Solutions Contrasted

SWMM 4 and SWMM 5 St. Venant Solutions Contrasted

by dickinsonre
SWMM 4 and SWMM 5 St. Venant Solutions Contrasted

1. Compute at time t+delta t the values of dQ/dt for the Links and dH/dt for the Nodes from the properties at time t
2 Iterate at least 2 times until either all nodes and links are converged or a maximum of 8 iterations are reached
3. Use the values of Q and H at time t+delta t for the new time step

The SWMM5 Solution for Flow and Depth at each time step.  The new depth and new flow is always based on the old depth and old flow and normally converges fast as the flow is gradually varied.   The solution is iterative and implicitly uses the new depth and flow at each iteration.

The SWMM4 Solution for Flow and Depth is solved Explicitly at each time step.  The new depth and new flow is always based on the old depth and old flow and and a half and full time step during the time step.




No comments:

How to use the ICM Viewer with ICM Standard after installing from ICM Ultimate

  From version 2025 onwards, both Standard and Ultimate versions can be launched from a single installation by modifying the Target path in ...