Monday, March 20, 2023

Step14_Infosewer_wetwell_wwellhyd_csv.cfg - InfoSewer to ICM InfoWorks Networks

 Step14_Infosewer_wetwell_wwellhyd_csv.cfg - InfoSewer to ICM InfoWorks Networks

Uses ODIC in ICM InfoWorks Networks to read InfoSewer CSV or Geodatabases files with a cfg template - see below.

Object FieldsImport FieldsDefault Values
Node typeManhole
System type
Connection type
Asset IDID
Ground levelMAX_LEVEL
Flood levelMAX_LEVEL
Chamber floor levelBTM_ELEV
Chamber roof levelMIN_LEVEL
Chamber plan areaDIAMETER
Shaft plan areaDIAMETER
Flood type
Benching method
2D element area factor
Floodable area
Flood depth 1
Flood depth 2
Flood area 1 (%)
Flood area 2 (%)
Flooding discharge coefficient
Head discharge table
Number of gullies
Relative stages
Inlet input type
Inlet type
Inlet flow efficiency table
Cross slope
Grate width
Grate length
Number of transverse bars
Opening length
Number of longitudinal bars
Opening height
Gutter depression
Number of diagonal bars
Lateral depression
Minimum area including voids
Area of voids
Splashover velocity
% clogging
Half Road Width
Weir behavior depth
Grate clear opening area
Inlet user equation value a
Inlet user equation value b
Base area
Infiltration loss coefficient
Shaft additional storage: user
Shaft additional storage: compensation
Shaft additional storage: simplification
Shaft additional storage: correction
Chamber additional storage: user
Chamber additional storage: compensation
Chamber additional storage: simplification
Chamber additional storage: correction
Liner level
Vegetation level
Infiltration loss coefficient above vegetation
Infiltration loss coefficient above liner
Infiltration loss coefficient below liner
Lateral node ID
Lateral link suffix
InfoAsset unique ID
InfoAsset ID
1D-2D linkage basis
User number 1

No comments:

AI Rivers of Wisdom about ICM SWMM

Here's the text "Rivers of Wisdom" formatted with one sentence per line: [Verse 1] 🌊 Beneath the ancient oak, where shadows p...