Saturday, August 10, 2013
How to Make a Small Model out of a Large Model in H2OMAP Sewer and InfoSewer
Subject: How to Make a Small Model out of a Large Model in H2OMAP Sewer
The process is easy if you use Domain and Facilities.
Step 1. Use the Trace Upstream Network Command in Utilities to find the upstream network from your node of interest. The upstream network is saved to a Domain.
Step 2. Use the Facility Manager to 1st deactivate the whole network and then 2nd to add the Domain to your Facility or the nodes and links that you will simulate
You now have a smaller network to examine in Detail. You may have to make a temporary Outfall node to run the model if there are no Outfalls in the model.
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Subject: Manhole Elevations in InfoSWMM and SWMM 5 Starting from the bottom of the manhole you have these regions of compu...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...