Saturday, October 20, 2018
How to Extract the Engine SWMM5 Calculated Slope in InfoSWMM
How to Extract the Engine SWMM5 Calculated Slope in InfoSWMM.
The slope is a calculated value in SWMM5.
Please see this other blog for the slope calculations in SWMM5
Step 1 – Run the model
Step 2 – Load the Conduit Summary Table
Step 3 – The slope for an individual link is shown in the Attribute Browser in the Output section (slope is a fraction)
Step 4 - Copy the slope (percent slope) from the Conduit Summary Table to the Conduit Information Table
Step 5 - The slope can now be used outside of the SWMM5 engine to find adverse slopes.
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...
InfoSWMM Version Numbers and the version of Arc Map they use and which EPA SWMM5 Engine is used for Each InfoSWMM VersionInfoSWMM Version Numbers InfoSWMM Version 14.7 Update 3 for Arc Map 10 to 10.8 and Windows 7/8/8.1/10 - EPA SWMM 5.1.014 4/12/2020 ...