|Vertical Roughness in a Pipe In InfoSWMM|
Sunday, September 11, 2016
Vertical Roughness in a Pipe In InfoSWMM
Vertical Roughness Threshold- The Vertical Roughness Threshold is a fraction and
the Threshold depth calculated from this fraction will be the Vertical Roughness
Threshold Fraction * Maximum depth. If the Maximum depth is 3 meters and the Vertical
Roughness Threshold is 0.5 then the dividing depth is 1.5 meters
Vertical Roughness - The lower or higher link roughness is entered as the Vertical
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...