Saturday, January 11, 2014

Dummy Outfall for Dynamic Wave Models converted from Kinematic Wave Models in SWMM 5

If you are using Kinematic Wave Routing in SWMM 5 you can switch to Dynamic Wave if you have any issues with a continuity error.  There is on potential issue, however, as you need to have an outfall in your dynamic wave model.  You can get around this issue by adding a dummy isolated outfall but it would be better to have an actual outfall.

Adding a Dummy Outfall in SWMM 5

No comments:

ChatGPT Version of the SWMM5 Wikipedia Page Introduction

  The EPA Storm Water Management Model (SWMM) is a computer software that simulates the rainfall-runoff-routing process in urban areas. It o...