Subject: How to Make a Small Model out of a Large Model in H2OMAP Sewer
The process is easy if you use Domain and Facilities.
Step 1. Use the Trace Upstream Network Command in Utilities to find the upstream network from your node of interest. The upstream network is saved to a Domain.
Step 2. Use the Facility Manager to 1st deactivate the whole network and then 2nd to add the Domain to your Facility or the nodes and links that you will simulate
You now have a smaller network to examine in Detail. You may have to make a temporary Outfall node to run the model if there are no Outfalls in the model.
|
Autodesk Technologist with Information about Stormwater Management Model (SWMM) for watershed water quality, hydrology and hydraulics modelers (Note this blog is not associated with the EPA). You will find Blog Posts on the Subjects of SWMM5, ICM SWMM, ICM InfoWorks, InfoSWMM and InfoSewer.
Tuesday, July 12, 2011
How to Make a Small Model out of a Large Model in H2OMAP Sewer
Subscribe to:
Post Comments (Atom)
RTK SWMM5 Import to ICM using ODIC
Object Fields Import Fields Default Values RTK hydrograph ID ID Response ratio R - short term RFVOL_EFF 0.050 Time to peak T - short term ...
-
@Innovyze User forum where you can ask questions about our Water and Wastewater Products http://t.co/dwgCOo3fSP pic.twitter.com/R0QKG2dv...
-
Engine Error Number Description ERROR 101: memory allocation error. ...
-
47th Annual International Conference Toronto, Canada February 26-27, 2014 Call for papers Have you implemented a good idea recen...
No comments:
Post a Comment