Autodesk Technologist with Information about Stormwater Management Model (SWMM) for watershed water quality, hydrology and hydraulics modelers (Note this blog is not associated with the EPA). You will find Blog Posts on the Subjects of SWMM5, ICM SWMM, ICM InfoWorks, InfoSWMM and InfoSewer.
Showing posts with label The Total flow from a Subcatchment in SWMM 5. Show all posts
Showing posts with label The Total flow from a Subcatchment in SWMM 5. Show all posts
Sunday, July 28, 2013
Saturday, October 23, 2010
The Total flow from a Subcatchment in SWMM 5
Note: The total flow from a Subcatchment is the sum of the flow from the impervious area with and without depression storage and the pervious area with depression strorage. The same width, slope but different roughness applies to the impervious and pervious portions of the subcatchment.
Subscribe to:
Posts (Atom)
AI Prompt for Generating a SWMM5 inp file with Rules
Below is an example prompt you can use (in ChatGPT or any advanced language model that understands SWMM5 syntax) to generate a syntactical...
-
@Innovyze User forum where you can ask questions about our Water and Wastewater Products http://t.co/dwgCOo3fSP pic.twitter.com/R0QKG2dv...
-
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...
-
Subject: Detention Basin Basics in SWMM 5 What are the basic elements of a detention pond in SWMM 5? They are common in our back...