Friday, January 11, 2019

Three Types of Simulation Runs in InfoSewer

Three Types of Simulation Runs in InfoSewer
Three different types of hydraulic analyses can be carried out by InfoSewer and are explained below in the following sections.  Here are the three Run Manager Tabs

InfoSewer Pro Only has the Storm Tab, if you do not have the Pro version you will not be able to simulate RDII or Stormwater Runoff
InfoSewer and InfoSewer Pro allow you to use the General, Peaking, Quality and Design Tabs


No comments:

RTK SWMM5 Import to ICM using ODIC

  Object Fields Import Fields Default Values RTK hydrograph ID ID Response ratio R - short term RFVOL_EFF 0.050 Time to peak T - short term ...