Wednesday, July 31, 2013

Tributary Area to a Node in SWMM 5 or InfoSWMM

Note:  Tributary Area to a Node in SWMM 5 or InfoSWMM

Here are the steps you neeed to take to calculate the tributary area of a node in InfoSWMM:

Step 1:  Use the DB Editor to get the total area in your model using the Data Statistics Tool.



Step 2:  Use the Process options in InfoSWMM to ONLY simulate surface runoff and flow routing.


Step 3. Copy the Node name and Total Inflow Volume from the Juntion Summary Output Table to Excel


Step 4:  Find the Total Wet Weather Flow during the simulation from the Wet Weather Inflow Row in the Flow Continuity Table.

Dry Weather Inflow   0.000  0.000
Wet Weather Inflow  0.782   0.255

Step 5. Make a new column in Excel to calculate the tributary area.

The Tributary Area of a Node = Total Inflow Volume / Total Wet Weather Flow * Total Subcatchment Area from Step 1.

You will now have the tributary area for each node.  You can verify this number = the total tributary area at the outfalls should equal the Total Subcatchment Areafrom Step 1.


Maximum
Maximum
Lateral
Total
Time
of
Lateral
Total
Tributary
Inflow
Inflow
Occurrence
Volume
Inflow
Inflow
Area
Node
Type
CFS
CFS
days
hr:min
10^6 gal
10^6 gal
acres
P001
JUNCTION
5.54
10.86
0
2:27
0.1
0.255
14.74
P005
JUNCTION
2.14
7.42
0
2:26
0.039
0.155
8.96
P009
JUNCTION
5.78
5.78
0
2:25
0.106
0.106
6.13
P011
JUNCTION
0.7
0.7
0
2:34
0.01
0.01
0.58
OUTLET
OUTFALL
0
10.84
0
2:28
0
0.255
14.74

How to Set Up an InfoSWMM 2D Simulation Polygon and Mesh


Subject: How to Set Up an InfoSWMM 2D Simulation Polygon and Mesh

Step 1: Create the 2D Database



Step 2: Verify the Creation of the 2D Database



Step 3: Create the background Simulation Polygon for the 2D simulation


Step 4: Create the Mesh on the 2D Simulation Polygon


Step 5: Run the combination 1D and 2D network


Step 6: Simulating the network uses up to the number of cores on your computer for the 2D flow.


Step 7: 2D plot of the flooded mesh points.



Drainage Wells or a Vertical Exfiltration Trench in InfoSWMM

Subject:  Drainage Wells or a Vertical Exfiltration Trench in InfoSWMM

Note, this is just one way to model an Exfiltration Trench.  The source for the image below is Rice Creek Watershed

You can make a storage node to simulate the trench with the following characteristics:

·         Functional or Shape Curve to describe the shape of the trench,
·         Infiltration parameters to simulate the infiltration flow out of the bottom or sides of the trench,


Step 1:  Define the shape and geometrical characteristics of the Infiltration Trench


Step 2: Define the soil infiltration characteristics of the trench


Step 3:  Run the simulation.  The Storage Volume Summary tells you the volume infiltrated and the average outflow.


Step 4:  Output Manager will also show the infiltration  outflow, the depth and the volume of the infiltration/storage node.


Step 4:    Infiltration losses out the side and bottom of the orifice.


How to make Multiple Storm Events in InfoSWMM and How to Use them in the Scenario Manager

Subject:  How to make Multiple Storm Events in InfoSWMM and How to Use them in the Scenario Manager

Step 1.  Make a new Time Series to hold the data points for your new Rainfall Time Series in the Operation Tab of the Attribute Browser.


 

Step 2.  Populate the Rainfall Distribution with a SCS Type II Hyetograph with a 1 inch rainfall total

 


Step 3.  Now Clone the created Rainfall Distribution and make 10, 25, 50 and 100 year storm events each with 1 inches of rainfall in a cumulative distribution.

 

Step 4.  Now use the Block Edit command and convert each of the newly created hyetographs to 4, 7, 10, 15 and 20 inch cumulative rainfall totals from the original 1 inch rainfall total (for example).


Step 5.  Now create a Raingage for each of the newly created hyetograph time series using the DB Editor under the Raingage Table in Hydrologic Data




Step 6.  Link the Time Series to the new Raingages and define the type (cumulative), units (inches) and hyetograph interval (15 minutes)



Step 7. Make 4 New Scenarios for the different return period hyetographs,  the Base Scenario will use the 5 year or 4 inch SCS II rainfall.



Step 8Use the DataSet Manager and make 4 new Subcatchment DB Tables in which each Subcatchment Set uses a different return period hyetograph.



Step 9. Run the Batch Simulator for all 5 scenarios including the Base Scenario.



Step 10.  You can  use the Output Report Manager to see the Rainfall for all of the Batch Runs to check if the proper rainfall was used for each Scenario Simulation.




Tuesday, July 30, 2013

Weirs in InfoSWMM and SWMM5

Weirs in InfoSWMM and SWMM5

Subject: Weirs in InfoSWMM
 Figure 1 shows the relationship between the weir input data and the upstream and  downstream nodes.
·         Height,
·         Crest and
·         Node Invert Elevation
 There are four types of weirs and if the weir becomes submerged downstream the Villemonte weir submergence correction is applied (Figure 2).  You can have flow reversal across the weir unless you use a Flap Gate for the weir (Figure 3). 
Figure 1:  Definition of Weir Terms
Figure 2: Villemonte Weir Submergence Correction
Figure 3:  Flow Reversal in a Weir

A Basic InfoSewer Wet Well, Pump and Force Main System

Note:  A Basic InfoSewer Wet Well,  Pump and  Force Main System

AI Rivers of Wisdom about ICM SWMM

Here's the text "Rivers of Wisdom" formatted with one sentence per line: [Verse 1] 🌊 Beneath the ancient oak, where shadows p...