Showing posts with label #InfoSewer. Show all posts
Showing posts with label #InfoSewer. Show all posts

Thursday, October 20, 2016

How to Use Arc Map Selection to add to Domains in #InfoSewer and #InfoSWMM

How to Use Arc Map Selection to add to Domains in #InfoSewer and #InfoSWMM:
  1. Use the Arc Map Selection Tools
  2. Select a layer of Nodes or Links in Arc Map
  3. Add your elements to the Arc Map Selection and finally
  4. Add the selected elements from Arc Map to the InfoSewer Domain (Bullet 4)

How to Use Arc Map Selection to add to Domains in #InfoSewer and #InfoSWMM


Sunday, November 22, 2015

Sunday, November 15, 2015

Innovyze St Venant Solutions for InfoSewer, H20Map Sewer, #InfoSWMM, H2OMap SWMM and #InfoWorks_ICM and #InfoWorks_ICM_SE

This blog contrasts the St Venant Solutions for InfoSewerH20Map Sewer (1), InfoSWMM/H2OMap SWMM and ICM/ICM SE.

1.  Assumptions for the St. Venant Equations

The assumptions behind Lumped and Distributed Models along with the assumptions of the St Venant equations.  InfoSewerH20Map Sewer, InfoSWMM, H2OMap SWMM, SWMM5, ICM and ICM SE are all Distributed models for Unsteady flow.  InfoSWMM and InfoSewerH20Map Sewer have options for direct steady flow.  ICM and InfoSWMM can also use a quasi steady flow solution.   All of these Innovyze models use the Continuity Equation and Momentum equation for routing flows in links.  The numerical solution differs between the three Innovyze main  platforms:
  • Storm cloudInfoSewer and H2OMap Sewer
  • Storm cloudInfoSWMM,  H2OMap SWMM and SWMM 5
  • Storm cloudICM and ICM SE
image242[5]
image243[5]

image241[7]

Continuity Equation

image489[5]

Various Forms of the Momentum Equation

image488[5]

2.  Muskingum-Cunge for InfoSewerH20Map Sewer

image143[5]
The continuity (mass conservation) equation is:
image499[6]
image497[5]
where
x          =          distance along the pipe (longitudinal direction of sewer)
A          =          flow cross sectional area normal to x
y          =          coordinate direction normal to x on a vertical plane
d          =          depth of flow of the cross section, measured along y direction
Q         =          discharge through A
V          =          cross sectional average velocity along x direction
S0         =          pipe slope, equal to sin θ
θ          =          angle between sewer bottom and horizontal plane
Sf            =          friction slope
g             =          gravitational acceleration
t           =          time
β          =          Boussinesq momentum flux correction coefficient for velocity distribution

3. SWMM5, H2OMap SWMM and InfoSWMM

image144[5]
 

4. ICM and ICM SE

image145[4]
image149[4]

5. A common look at the Equations for ICM, ICM  SE. InfoSWMM and H2OMap SWMM

image192[7]

ICM 2D and InfoSWMM 2D Equations

ICM 2D and InfoSWMM share the same computational engine as described on the Innovyze Blog
image491[5]
As the scheme is an explicit solution it does not require iteration to achieve stability within defined tolerances like the ICM 1D scheme or the iterative solution in InfoSWMM.  Instead, for each element, the required timestep is calculated using the Courant-Friedrichs-Lewy condition in order to achieve stability, where the Courant-Friedrichs-Lewy condition is
image492[5]

Sunday, August 30, 2015

How to use the Flow Splitter in InfoSewer for Dendritic Networks

Subject: How to use the Flow Splitter in InfoSewer for Dendritic Networks

InfoSewer, which is an extension in Arc Map, does need to have slit split defined where gravity mains merge together to determine the amount of flow in each of the downstream conduits (Figure 1).   The options for the flow splitter in each of the downstream links are:

1. Automatic Allocation

2. Fixed Flow Percentage

3. Variable Flow Percentage and

4. Inflow-Outflow Curve

At an outfall where the invert of the outfall pipe is raised compared to the inverts of the incoming and outgoing pipes a flow split of Variable Flow Percentage or Inflow/Outflow curve may work better (Figure 2). 
Figure 1. Options for Performing a Flow Split in InfoSewer

Figure 2.  The Effect of the flow split can be used to model complex situations in a dendritic model with outfalls.

Wednesday, July 15, 2015

H2S Modeling in an InfoSWMM Pond

The control of odorous gases and the corrosion of sewers are the two most important problems in operating wastewater collection systems.  H2S is the most commonly known and prevalent odorous gas associated with domestic wastewater collection and treatment systems.  InfoSewer. InfoSWMM, H2OMap SWMM or H2OMAP Sewer suite gives wastewater engineers a powerful Operations and Maintenance (O&M) tool to readily model and analyze entire sewer collection systems for sulfide generation and corrosion potential under varying conditions anticipated throughout the life of their systems. H2S  predicts sulfide buildup in sewer collection systems for gravity sewers, force mains, and wet wells using the Pomeroy-Parkhurst equations. This unique and powerful tool enables wastewater utilities to pinpoint odor and corrosion problems, develop effective monitoring programs, alert plant operators and sewer maintenance workers to potential danger and the need to observe safety practices, and evaluate and implement effective control system such as aeration, chlorination, and mechanical cleaning.
Modeling of hydrogen sulfide using H2S Detector requires minimal input data from the user. The required data include:
Lightning average daily temperature for the region (in degrees C).
Lightning reaction rate coefficient (per day) which was described above in relation to BOD modeling.
Lightning pH of the wastewater. The normal pH range of municipal wastewater is 6.0 to 8.0.
Lightning effective sulfide flux coefficient  for sulfide generation by the slime layer in gravity sewers (meter/hour). For conservative analysis (i.e., observed sulfide buildup generally less than predicted), the suggested values of this parameter is 0.00032.
Lightning a dimensionless coefficient to account for sulfide losses by oxidation and escape to atmosphere. For conservative analysis (i.e., observed sulfide buildup generally less than predicted), the suggested values of this parameter is 0.64. For moderately conservative analysis a value of 0.96 is suggested.
Lightning logarithmic ionization constant for hydrogen sulfide (unit less), a function of temperature and specific electrical conductance of the waste water. Its value generally varies from 6.67 (at a temperature of 40oC and specific electrical conductance of 50, 000 micromhos/cm) to 7.74 (at a temperature of 10oC and specific electrical conductance of 0 micromhos/cm).
Lightning percent of total sulfides that occur in the soluble (dissolved) form for the wastewater, most frequently known to vary from 70 to 90 percent.
The default values used by the model for these inputs are shown in the following dialog box. In addition to the listed data, the user has to supply initial concentration of total sulfides and ultimate BOD of  the wastewater. These two variables could be assigned using the quality tab available at the top of the attribute browser, for one source node at a time, or using the " Group Edit on Domain" feature that enables simultaneous assignment of the two variables for all source nodes in the domain.
InfoSWMM or H2OMap SWMM S and BOD5 Parameters
InfoSWMM or H2OMap SWMM S and BOD5 Parameters
How the H2S concentration changes with an increase in Pond Area.
How the H2S concentration changes with an increase in Pond Area.

Thursday, May 14, 2015

World-Renowned Urban Drainage Modeling Authority Robert Dickinson Joined Innovyze in January, 2008

World-Renowned Urban Drainage Modeling Authority Robert Dickinson Joined Innovyze in January, 2008

Broomfield, Colorado USA, January 16, 2008/altered 2014

2008/2014 Robert E. Dickinson, one of the world’s leading experts in wastewater and urban drainage modeling, has joined Innovyze as Product Sector Leader. Dickinson, who comes to the company from CDM now CDMSmith, will be charged with maintaining, enhancing and supporting Innovyze's flagship SWMM5-based product line (InfoSWMM and H2OMAP SWMM as well as the GIS based InfoSewer and H2OMap Sewer), which are some of the industry’s leading wastewater and urban drainage systems design and modeling software. He will also be responsible for coordinating vital collaborative research and technology transfer with key universities and government organizations as well as developing business strategies that advance Innovye’s overall growth objectives in wastewater and stormwater systems management and heighten its initiatives in both U.S. and international markets.

Mr. Dickinson brings over thirty-five years of experience in software development and management of wastewater and stormwater planning and design projects to Innovyze. A principal developer of the industry-standard and FEMA-certified SWMM5 software, he has a distinguished background in computational hydraulics and high level simulation programming. He holds an M.E. degree in Environmental Engineering from the University of Florida, Gainsville.

“We are thrilled to bring Robert’s formidable talents and expertise to our company,” said Innovyze's President and COO Paul Boulos. “As one of the world’s leading experts in hydraulic and hydrologic modeling, he has made significant contributions to the field of water resources engineering. His unique combination of proven project engineering expertise, management skills and high-level technical capabilities is coveted in our industry.
“A number of factors make Robert the ideal leader to help Innovyze advance the state-of-the-art in dynamic sewer network modeling and spearhead the continued development of our SWMM5-based products family. They include his impressive record of leadership, impeccable reputation, key role in the USEPA Storm Water Management Model (SWMM5) redevelopment program, strong expertise in both numerical methods and hydrology/hydraulics, and in-depth knowledge of the wastewater industry.

“While he will be based in Tampa, Florida, Robert will work closely with our product development team and our clients as we step up our efforts to help communities around the world manage urban runoff and wet weather water quality problems in combined, sanitary and storm sewers and protect the ecological health of our waterways.”

“I am truly excited to be joining Innovyze,” said Dickinson. “For the past five years, I have followed the company’s rapid growth and development of an impressive product portfolio. I have always admired Innovyze’s unparalleled technical expertise and its steadfast commitment to research, innovation, product quality and customer care. I believe a breakthrough approach to systems modeling is a critical key to helping communities better manage and operate their buried hydraulic infrastructures and protect the environment. I look forward to playing a pivotal role in advancing Innovyze’s comprehensive urban drainage design and modeling product line and maintaining its leadership in the global wastewater industry.”

2014 - That was fun - an update of an announcement from the past.  The original is on our website. I changed my name from Bob to Robert, the company name from MWHSoft to Innovyze and list my my actual job or jobs I have been doing at @Innovyze from 2008.  I left the title alone - sometimes it is best to have a goal in life and trying to achieve the title of the announcement is something I would like to approach in my remaining Innovyze years.  I probably will not reach it but I appreciate the mastery of the Paul Boulos announcements - he writes the most creative and wonderful press releases. You should subscribe to them from www.innovyze.com if you want to read about the future of water, sewer and stormwater.  A final mention of Alight Tsai who manages http://www.innovyze.com/ and is always helpful with great images for our software and help files.  I would be remiss if I did not mention our great R/D product development teams in Monrovia and Wallingford. I am proud to be a small part of the Monrovia team.  Other history mentions about SWMM3/4/5 in my past can be found here http://www.swmm5.net/2012/05/my-history-with-various-versions-of.html

Another update for May 2015 - we are making great strides in social media led by our Director of Marketing Rajan Ray who can be found at @InnovyzeRaj and in general at @Innovyze. You can see all of our tweets by searching for Innovyze on Twitter

My contact info - in case you need to call me, I prefer email however.

Robert Dickinson
Product Sector Leader (PSL) for Innovyze Inc.
Telephone:    813-712-0664 

Innovyze Links or Email Addresses that May Help You
My PSL Software and My Help for Other Software Or How I Can Help You
My Email
Innnovye Support Email
The Innovyze Blog
The Innovyze Forum
How to Find Product Updates
Innovyze on Twitter

Innovyze on LinkedIn
Innovyze on Facebook
Best New Blog

Innovyze Youtube Videos


Read about Innovyze InfoWater winning the ArcGIS for Desktop Based Application category for the 2015 Esri Partner Conference Awards

The Link to Future Innovyze Webcasts

Are you interested in connecting with fellow Innovyze users?  Register for the Innovyze Users Forum, a customer-focused learning and sharing environment, and join in the discussion! 
PSL: InfoSWMM , InfoSewer, H2OMAP SWMM, H2OMAP SEWER and InfoSWMM Suite, InfoSWMM Sustain, SWMMLive and InfoSWMM 2D
Other : ICM, ICM SE, IWCS, SWMMLive, SWMM5,  InfoSWMM SFEM,, Any Other Innovyze Product (less)

You can see all of our software on our catalog

My Blog
My Other Blog
My Blog Finder
My Forum
Latest InfoSWMM Press Release
My Twitter
Little Known Fact about InfoSWMM
My Innovyze blogs
http://blog.innovyze.com/category/infosewer/
My Vimeo Videos

My Youtube Videos
A short history of my life with SWMM

The Current InfoSWMM Version is InfoSWMM v13 SP1 Update #5 which is based on EPA SWMM 5.1.007  You can read about SWMM5 on Wikipedia  and InfoSWMM vs SWMM 5 on this blog post. An advantage of updating to the newer version of Info/Map/SWMM/Sewer is a newly designed help file with many more FAQ’s and the User Guide as part of the help file.




AI Rivers of Wisdom about ICM SWMM

Here's the text "Rivers of Wisdom" formatted with one sentence per line: [Verse 1] 🌊 Beneath the ancient oak, where shadows p...