Showing posts with label H2OMap SWMM and #InfoWorks_ICM and #InfoWorks_ICM_SE. Show all posts
Showing posts with label H2OMap SWMM and #InfoWorks_ICM and #InfoWorks_ICM_SE. Show all posts

Sunday, November 15, 2015

Innovyze St Venant Solutions for InfoSewer, H20Map Sewer, #InfoSWMM, H2OMap SWMM and #InfoWorks_ICM and #InfoWorks_ICM_SE

This blog contrasts the St Venant Solutions for InfoSewerH20Map Sewer (1), InfoSWMM/H2OMap SWMM and ICM/ICM SE.

1.  Assumptions for the St. Venant Equations

The assumptions behind Lumped and Distributed Models along with the assumptions of the St Venant equations.  InfoSewerH20Map Sewer, InfoSWMM, H2OMap SWMM, SWMM5, ICM and ICM SE are all Distributed models for Unsteady flow.  InfoSWMM and InfoSewerH20Map Sewer have options for direct steady flow.  ICM and InfoSWMM can also use a quasi steady flow solution.   All of these Innovyze models use the Continuity Equation and Momentum equation for routing flows in links.  The numerical solution differs between the three Innovyze main  platforms:
  • Storm cloudInfoSewer and H2OMap Sewer
  • Storm cloudInfoSWMM,  H2OMap SWMM and SWMM 5
  • Storm cloudICM and ICM SE
image242[5]
image243[5]

image241[7]

Continuity Equation

image489[5]

Various Forms of the Momentum Equation

image488[5]

2.  Muskingum-Cunge for InfoSewerH20Map Sewer

image143[5]
The continuity (mass conservation) equation is:
image499[6]
image497[5]
where
x          =          distance along the pipe (longitudinal direction of sewer)
A          =          flow cross sectional area normal to x
y          =          coordinate direction normal to x on a vertical plane
d          =          depth of flow of the cross section, measured along y direction
Q         =          discharge through A
V          =          cross sectional average velocity along x direction
S0         =          pipe slope, equal to sin θ
θ          =          angle between sewer bottom and horizontal plane
Sf            =          friction slope
g             =          gravitational acceleration
t           =          time
β          =          Boussinesq momentum flux correction coefficient for velocity distribution

3. SWMM5, H2OMap SWMM and InfoSWMM

image144[5]
 

4. ICM and ICM SE

image145[4]
image149[4]

5. A common look at the Equations for ICM, ICM  SE. InfoSWMM and H2OMap SWMM

image192[7]

ICM 2D and InfoSWMM 2D Equations

ICM 2D and InfoSWMM share the same computational engine as described on the Innovyze Blog
image491[5]
As the scheme is an explicit solution it does not require iteration to achieve stability within defined tolerances like the ICM 1D scheme or the iterative solution in InfoSWMM.  Instead, for each element, the required timestep is calculated using the Courant-Friedrichs-Lewy condition in order to achieve stability, where the Courant-Friedrichs-Lewy condition is
image492[5]

AI Rivers of Wisdom about ICM SWMM

Here's the text "Rivers of Wisdom" formatted with one sentence per line: [Verse 1] 🌊 Beneath the ancient oak, where shadows p...