Thursday, July 20, 2017
TeeChart Standard v2017 VCL/FMX works with Delphi 10.1 Berlin and 10.2 Tokyo Starter, #SWMM5
For those interested in using the latest Delphi GUI with SWMM 5.1.012 and before. TeeChart is the needed graphics. The latest TeeChart Standard v2017 VCL/FMX works with Delphi 10.1 Berlin and 10.2 Tokyo Starter, but there are not specific installers, you should install theTeeChart Standard Starter packages manually following the steps below:
1- Open the Components->Installation Packages and add the DclFMXTeeStd924.bpl and DclTeeStd924.bpl from installation folder, concretely you find the packagesin the %Program Files (x86)%\Steema Software\Steema TeeChart Standard VCL FMX 2016.18\Delphi24\bin
The below image shows you where:
2- Then you should see in the Install Packages window the results below:
3- Create a simple application and run it.
Note the steps are for Rad Studio 10.1 Berlin, but you should follow the same steps to install Teechart Standard in Rad Studio 10.2 Tokyo.
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...