Saturday, August 10, 2013
InfoSWMM and H2OMap SWMM Pump Summary Table
Subject: InfoSWMM and H2OMap SWMM Pump Summary Table
The Pump Summary Table in Report Manager tells you how often the pumps turn on (Start-Up Count), the percent of the simulation time it was used (Percent Utilized) and the maximum, minimum and average flow for the pumps.
You can also see flows in the downstream links from the pumps in the force mains along with the pumps.
If you use the Mixed Graph Control you see the Pump flows and Link Flows on the same Graph
You can control the replay of the HGL Plot by altering the stepping time in Graph Settings
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...