Infiltration Data in SWMM 5

Subject:  Infiltration Data in SWMM 5

If you are using Non linear Reservoir Modeling in SWMM 5 there are

1.   Five parameters for Horton Infiltration,
2.   Three parameters for Green-Ampt and
3.   Two parameters for CN infiltration, one parameter (conductivity) has been deprecated by the EPA in SWMM 5.   The Drying Time is used to regenerate the Infiltration Rate for continuous simulation.  Only two parameters are now used for CN infiltration:  The CN value itself and the drying time.


Comments

Popular posts from this blog

Soffit Level

SWMM 5 Error Messages

How InfoSWMM and InfoSWMM SA 2D Link and 3D Node Graphics Help You Understand the Response of Your Network to Wet Weather Flow