Thursday, August 8, 2013

How to Easily Make a Smaller Model in InfoSWMM Using Trace Upstream Network

How to Easily Make a Smaller Model in InfoSWMM Using Trace Upstream Network

Step 1.  Use the Trace Upstream Network command to find all of the network above the node of interest (Figure 1). 
Step 2.  Use the Trace Downstream Network Command to find all of the network below the node of interest and place it in the Doman (Figure 2).
Step 3.  Use Facility Manager to make the Lower Network in the Domain Inactive (Figure 3).
Step 4.  Change the Node of Interest from a Manhole to an Outfall


Figure 1.  Trace Upstream Network
Figure 2.  Put the lower Section of the Network in a Domain

Figure 3.  Use Facility Manager to make the Lower Network in the Domain Inactive

No comments:

Hidden features of the 1D St Venant solution for SWMM5, InfoSWMM, and ICM SWMM Networks

1/ There is also an ArcEngine version of InfoSWMM call InfoSWMM SA. I will SA to show some hidden features of the 1D St Venant solution f...