Sunday, August 4, 2013

How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

Subject:   How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

The groundwater component of SWMM 5 is found in the gwater.c code.  It (as is all of SWMM 5) is excellently written in small functions by Lew Rossman of the EPA during the SWMM 5 development process.  However, code being code sometimes it is easier to see how the code is functioning.  This blog or note tries to show the mass balance local function updateMassBal

The groundwater component consists of groundwater data (gw in the equation) and aquifer data (a) in the equation.  The equation for the groundwater mass balance is shown in Figure 1.   The infiltration, evaporation occur only over the perviousarea but the percolation out the bottom of the aquifer occurs over the whole Subcatchment.

Figure 1.  Groundwater Mass Balance

No comments:

HOW TO USE GIS GATEWAY IN INFOSWMM TO CREATE BOTH DATA AND MODEL RESULTS SHAPEFILES

  GIS Gateway – Create Shapefile T he Create Shapefile tool available from the  GIS Gateway , allows you to create a new ESRI® Shapefile dir...