Stormwater Management Model (SWMM) Information for watershed water quality, hydrology and hydraulics modelers (Note this Blog is not associated with the EPA). You will find Blog Posts and Twitter Embeds on the Subjects of SWMM5, InfoSWMM, InfoSewer, SWMMLive, InfoSWMM SUSTAIN, SWMM4 and SWMM in general.
Subscribe to this blog
Follow by Email
Example Groundwater Model in SWMM 5
Subject: Example Groundwater Model in SWMM 5
The attached model shows three ways in which the groundwater model of the SWMM 5 subcatchments interact with the node depths of the hydraulic network. The hydraulic network interaction can be either:
1.At a fixed water surface elevation, 2.At a time varying water surface elevation based on the inflow and geometry of the node and 3.At a threshold node water surface elevation.
Comment: A really nice water analogy for the field properties Divergence, Curl and Gradient from the Blog Starts With a Bang
....it's pretty mathematically intensive, but what's missing from most textbooks and E&M courses are physical explanations of what the mathematics means. For instance, I've started teaching about fields, and pretty much every textbook out there goes on and on about the properties of fields. They say you can do three things to fields, take the gradient, divergence, orcurl of them. (Are you asleep yet? I'm sorry!) What do these things mean? An easy way to picture it is in terms of water. If you placed a drop of water anywhere on, say,Earth, the magnitude and direction of how it rolls down is the gradient of the Earth's elevation. If you let that drop of water flow, as it goes downhill, it can either spread out or converge to a narrower stream. When we quantify that, that's what the divergence of the field is. And finally, when that water is …
Soffit Level (pipe technology)The top point of the inside open section of a pipe or box conduit. The soffit is the highest point of the internal surface of a pipe or culvert at any cross-section. The soffit is also referred to as the pipe obvert. So it is not quite the Crown of the Pipe. Here is an image I found that hopefully explains it better.
Engine Error NumberDescription ERROR 101: memory allocation error. ERROR 103: cannot solve KW equations for Link ERROR 105: cannot open ODE solver. ERROR 107: cannot compute a valid time step. ERROR 108: ambiguous outlet ID name for Subcatchment