Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot

Advanced Labeling in InfoSWMM or H2OMAP SWMM to show MM or IN on a HGL Plot

Here is how to get the maximum depth shown in millimeters or inches on a HGL Plot in InfoSWMM or H2OMAP SWMM– use the OTHER LINK Dimensions option.  You need to run the model again to have your new diameter shown on the HGL plot.  We use the output file to make the HGL plot and without a new model run the maximum depth will not be shown in either InfoSWMM or H2OMAP SWMM

Keys:
Use Other Units instead of feet or meters, and
Use the Advanced Labeling in InfoSWMM or H2OMAP SWMM

Comments

Popular posts from this blog

Soffit Level

SWMM 5 Error Messages

How InfoSWMM and InfoSWMM SA 2D Link and 3D Node Graphics Help You Understand the Response of Your Network to Wet Weather Flow