Stormwater Management Model (SWMM) Information for watershed water quality, hydrology and hydraulics modelers (Note this Blog is not associated with the EPA). You will find Blog Posts and Twitter Embeds on the Subjects of SWMM5, InfoSWMM, InfoSewer, SWMMLive, InfoSWMM SUSTAIN, SWMM4 and SWMM in general.
Subscribe to this blog
Follow by Email
1000 Year Simulation with Rainfall in SWMM5
Subject: 1000 Year Simulation with Rainfall
The attached one Subcatchment SWMM 5 model and associated Rainfall was created using the Random function in Excel on a measured NCD station in Boston. There is a dry weather flow component of 0.5 cfs with an hourly pattern. The rainfall averages 54 inches over the 1000 years and the runoff is 20 inches on average over the 1000 years.
Figure 1. Combined Flow at the Outfall for the 1000 year Simulation.
Soffit Level (pipe technology)The top point of the inside open section of a pipe or box conduit. The soffit is the highest point of the internal surface of a pipe or culvert at any cross-section. The soffit is also referred to as the pipe obvert. So it is not quite the Crown of the Pipe. Here is an image I found that hopefully explains it better.
Engine Error NumberDescription ERROR 101: memory allocation error. ERROR 103: cannot solve KW equations for Link ERROR 105: cannot open ODE solver. ERROR 107: cannot compute a valid time step. ERROR 108: ambiguous outlet ID name for Subcatchment
New InfoSWMM linked 2D Link and 3D Node graphics help you understand one of the most critical outputs in any Stormwater, Combined Sewershed or Sanitary Sewershed Network Model the value and timing of how full the pipes and nodes are over time and how this changes during Wet Weather Flow (Runoff or Infiltration Inflow).These new graphs are included in InfoSWMM v 14.6 and InfoSWMM SA V2 (InfoSWMM SA is not an Esri Extension in ArcMap but uses Arc Engine for GIS processing power) has many new graphical and map display tools that help answer the following modeling questions in a easy to understand group of linked Time Track Graph, 2D Graphs and 2D Thumbnails. If you are modeling a Stormwater Network and need to know the d/D or depth over maximum depth over time and at the peak of the Runoff event you can view linked graphs as shown in Figure 1.If you are modeling a Sanitary Network and need to find the d/D for Rainfall Induced Infiltration and Inflow (RDII) you can see the RDII fl…