Tuesday, July 30, 2013
Weirs in InfoSWMM and SWMM5
Subject: Weirs in InfoSWMM
Figure 1 shows the relationship between the weir input data and the upstream and downstream nodes.
· Crest and
· Node Invert Elevation
There are four types of weirs and if the weir becomes submerged downstream the Villemonte weir submergence correction is applied (Figure 2). You can have flow reversal across the weir unless you use a Flap Gate for the weir (Figure 3).
Figure 1: Definition of Weir Terms
Figure 2: Villemonte Weir Submergence Correction
Figure 3: Flow Reversal in a Weir
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...
Engine Error Number Description ERROR 101: memory allocation error. ...
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...