Continuous Simulation Aids for InfoSWMM

Subject:   Continuous Simulation Aids for InfoSWMM

If you have a large network and especially if you are doing continuous simulation then you want to have many tools for helping you understand the network and the simulation results.  

v  In InfoSWMM and H2OMAP SWMM you can have a Base Network with many differenct Child Scenaio generations.  A Child can be either based on the Base Scenario of a different generation Child Scenario.

v  Facility Manager allows you to make inactive and active sets areas of your network, which makes simulating larger and smaller models a snap to do in InfoSWMM.   Run Manager lets you control which areas of the model  network gets save to the  binary graphics file (Figure 1). 

v  The Process Control in  Run Manager (similar to the process control in SWMM 5) allows the modeler to control  which processes are simulation to  help in her model  calibration.

Figure 1.  Scenarios, Facility Manager and Run Manger Options.

Figure 2.  Run Manager Process Controls.







Comments

Popular posts from this blog

Soffit Level

Water Analogies for Divergence, Curl and Gradient

SWMM 5 Error Messages