Subject: How to Compare the Output Manager
The value of the total inflow in the text output file is the integrated total for the whole simulation including all time steps. This is the total volume that is shown in Map Display for Nodes and Links or in the Summary Tables for Nodes and Links. If you graph the flow or depths in Output Report Manager and use the FieldStatistics tool it will only show you the statistics for the SAVED time steps. However, if you multiply the Sum (Total) Value by the saved interval in seconds you will have another estimate of the total node of link statistic. For example, a Sum Total of L/s times seconds yields liters which divided by 1,000 yields ML.
Figure 2. Map Display of the total link volume in the model run comes from the Node Inflow Summary Table in the Text Report File
***********************
Node Inflow Summary
***********************
----------------------------
Node Type
----------------------------
PN_060
|
Stormwater Management Model (SWMM) Information for watershed water quality, hydrology and hydraulics modelers (Note this Blog is not associated with the EPA). You will find Blog Posts and Twitter Embeds on the Subjects of SWMM5, InfoSWMM, InfoSewer, ICM SWMM Networks, SWMM4 and SWMM in general.
Friday, November 25, 2011
How to Compare the Output Manager Statistics in H2OMAP SWMM to the SWMM 5 Output Text File
Subscribe to:
Post Comments (Atom)
HOW TO USE GIS GATEWAY IN INFOSWMM TO CREATE BOTH DATA AND MODEL RESULTS SHAPEFILES
GIS Gateway – Create Shapefile T he Create Shapefile tool available from the GIS Gateway , allows you to create a new ESRI® Shapefile dir...

-
Engine Error Number Description ERROR 101: memory allocation error. ...
-
Subject: Manhole Elevations in InfoSWMM and SWMM 5 Starting from the bottom of the manhole you have these regions of compu...
-
Note: Orifice and Weir Flow Computations The orifice flow calculation proceeds as follows: 1. Initially and whenever the setting (i.e...
No comments:
Post a Comment