Sunday, November 13, 2011

How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

Subject:   How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

by dickinsonre
Subject:   How is the Mass Balance Calculated in the SWMM 5 Groundwater Component?

The groundwater component of SWMM 5 is found in the gwater.c code.  It (as is all of SWMM 5) is excellently written in small functions by Lew Rossman of the EPA during the SWMM 5 development process.  However, code being code sometimes it is easier to see how the code is functioning.  This blog or note tries to show the mass balance local function updateMassBal

The groundwater component consists of groundwater data (gw in the equation) and aquifer data (a) in the equation.  The equation for the groundwater mass balance is shown in Figure 1.   The infiltration, evaporation occur only over the perviousarea but the percolation out the bottom of the aquifer occurs over the whole Subcatchment.

Figure 1.  Groundwater Mass Balance

No comments:

InfoSWMM Version Numbers and the version of Arc Map they use and which EPA SWMM5 Engine is used for Each InfoSWMM Version

 InfoSWMM Version Numbers  InfoSWMM Version 14.7  Update 3 for Arc Map 10 to 10.8 and Windows 7/8/8.1/10 - EPA SWMM 5.1.014   4/12/2020   ...