Saturday, July 30, 2011

Exit, Other and Entrance Loss Values in SWMM 5

Subject:  Exit, Other and Entrance Loss Values in SWMM 5

The entrance, exit and other losses in SWMM 5 are computed at the upstream, downstream and midpoint of the sections of the link.  However, if the normal flow equation is used for the link during a time step then these losses are zero as the flow in the link is based solely on the upstream area and upstream hydraulic radius of the link.   If you add loss coefficients and the normal flow equation is used then you will not see any change in the flow as you modify the loss coefficients.

Exit, Other and Entrance Loss Values in SWMM 5

by dickinsonre
Subject:  ExitOther and Entrance Loss Values in SWMM 5

The entranceexit and other losses in SWMM 5 are computed at the upstream, downstream and midpoint of the sections of the link.  However, if the normal flow equation is used for the link during a time step then these losses are zero as the flow in the link is based solely on the upstream area and upstream hydraulic radius of the link.   If you add loss coefficients and the normal flow equation is used then you will not see any change in the flow as you modify the loss coefficients.




No comments:

HOW TO USE GIS GATEWAY IN INFOSWMM TO CREATE BOTH DATA AND MODEL RESULTS SHAPEFILES

  GIS Gateway – Create Shapefile T he Create Shapefile tool available from the  GIS Gateway , allows you to create a new ESRI® Shapefile dir...