Saturday, August 3, 2013

Additional Features in InfoSWMM and InfoSWMM SA

Subject:   Additional Features in InfoSWMM and InfoSWMM SA

The additional features supply the tools for your modeling or modelling:

1.   Dry Flow Allocation for your Sanitary or Combined Sewer Model
2.   Subcatchment Manager to estimate the impervious, slope, width and area of your Subcatchments,
3.   RDII Analyst to estimate the Infiltration/Inflow into your Sanitary Network,
4.   Calibrator to help calibrate the model data to monitored data
5.   Designer to design new links to prevent flooded or surcharge,
6.   InfoSWMM 2D to link your 1D network to a 2D network
7.   CapPlan for Capacity Analysis and Capital Planning,
8.   Pond Design for Stormwater Ponds
9. Import from InfoSewer and Import/Export from SWMM5
10. Hydraulic Engines for InfoMaster Sewer

Contrasting Add On Features for InfoSWMM and H2OMap SWMM

InfoSWMM      H2OMAP SWMM     
Conduit Storage SynthesizerConduit Storage Synthesizer
DWF AllocatorDWF Allocator
InfoSWMM 2Dn/a
InfoSWMM CapPlanInfoSWMM CapPlan
NetView to KMLNetView to KML
Pond DesignPond Design
RDII AnalystRDII Analyst
Risk Assesment Managern/a
Subcatchment Managern/a
An Engine for InfoMaster SewerAn Engine for InfoMaster Sewer
Imports InfoSewer, SWMM 5, H2OMAP SWMM, HEC-RAS GeometryImports H2OMap Sewer, SWMM 5, InfoSWMM, HEC-RAS Geometry

No comments:

Low Impact Development Control Editor in InfoSWMM based on SWMM5

Low Impact Development Control Editor The  LID Control Editor  is used to define a low impact development control that can be depl...